How to Fix the Waterproof Drain Stopper for Bathroom with Overflow

Drain Stopper for Bathroom with Overflow is the most effective solution that ensures your privacy and sound sleep in your shower. The drain stopper works just like the normal bathroom stoppers but with the additional feature of overflow protection. When the water of the bath reaches a higher level than the stopper, the alarm will be triggered and the water will stop flowing. This will avoid any inconvenience to you as well as your family members. With the advancement of technology, this system is not only efficient but also beautiful.

To install this amazing piece of innovation, just make sure you have everything you need to do so. They include installation kit, faucet, float switch, mounting strap, nuts and bolts. If you are not confident enough to handle the whole installation process, you can take the help of someone else to do it. Just consult to the people from the vendor on how to properly do the drain water storage system.

One important thing that you need to take note before buying drain Stopper for Bathroom with Overflow is to decide whether you want a stand-alone or a mixer system. Stand-alone system does not require mixing anymore since the overflow of the water will still keep the tub wet. Meanwhile, a combination of drain guard and drain Stopper for Bathroom with Overflow is more effective. You can conveniently install both the items at once to save time and effort. By doing so, you’ll be able to enjoy the pleasure of using both items simultaneously.

After buying the drain Stopper for Bathroom with Overflow, you have to install the wall-mounted overflow tray to get full protection from the overflowing water. Then, line up the water sensors at each corner of the tub. It also helps if you place a mat at each side of the tub. Line the sensors up in order to catch the falling drain water. This will protect your house as well as other things inside the house.

After preparing the overflow tray at the side of the tub, you can fill it with water from the shower head. Make sure that the water runs from the top and down the drain. To avoid water overflow at the future, you can add more water to the tank. When the water starts to spill, you can shut off the shower and call for a plumber immediately to have the water flowing properly.

Now you can shut off the shower and wait for the drain to stop. It would be better if you close all the windows to avoid unnecessary drain water splashes into the room. After the drain stop, you can clean the drain guard thoroughly and make it waterproof. Cleaning the drain guards is also good to remove any dirt that is stuck on it. Then, you can install the waterproof drain guards permanently.

After cleaning the overflow tray, you can use the drain Stopper for Bathroom with Overflow KPW100 and fix the sensor to the wall. You can also add the overflow tray with the rubber feet. If you think that the drain guard is already fixed, then you can close the door and turn on the light. This way, you can easily see whether the drain Stopper for Bathroom with Overflow KPW100 is working or not.

Turn the power back on in the bathroom and wait for the water to run through the drain Stopper for Bathroom with Overflow KPW100. You should notice that the water will flow into the overflow tray. Now, you should wipe the sensor with a dry towel or a moist cloth to dry it. Then, you can replace the overflow tray. Thus, you can now enjoy the protection of the drain Stopper for Bathroom with Overflow KPW100.